Does anyone here have a good reference "sheet" for replacing base weapon skins?
-
YPCD This whole UV warp thing is actually quite difficult, especially in Cod Zombies.
DannyPennis is there any sort of tutorial somewhere on the world wide web or do I have to just "fuck it I'm free ballin this" (experiment myself and go through trial and error)
-
YPCD I could only find it with a ready-made file. Perhaps there's a video out there with few views. I'll look for it for you.
-
YPCD I could only find it with a ready-made file. Perhaps there's a video out there with few views. I'll look for it for you.
DannyPennis thanks again for your support so far! I will try my best to look for videos or something similar and make it work.
-
YPCD https://youtu.be/3OUQvK2zyvU?si=V5tk39rB7a8Dra7n i found this.
-
DannyPennis Thanks again you've been quite helpful! I will see what I can do
-
This post is deleted!
-
DannyPennis Thanks again you've been quite helpful! I will see what I can do
-
YPCD Did you got what you wanted?
DannyPennis sorry I have returned now uuh the video isn't really all that helpful since it is for bo2 camos and not the mw3 base weapons
Now that I am back I will continue trying -
DannyPennis sorry I have returned now uuh the video isn't really all that helpful since it is for bo2 camos and not the mw3 base weapons
Now that I am back I will continue tryingYPCD I can only find videos with tilling PNG. If you happen to be unable to do it, I can try.
Sorry for any mistakes, my English isn't very good. -
YPCD I can only find videos with tilling PNG. If you happen to be unable to do it, I can try.
Sorry for any mistakes, my English isn't very good.DannyPennis Thanks for the offer. I will get back to you when I am going ape shit over my continuous failures. Until then I will experiment around more.
Your English is just fine I understood you quite well so far.
Only one thing I didn't really understand:
What exactly do you mean by "click on the edges of the cammo in the reference to create a cage, and then drag the points so that your logo stretches and distorts to exactly match the shape"? -
DannyPennis Thanks for the offer. I will get back to you when I am going ape shit over my continuous failures. Until then I will experiment around more.
Your English is just fine I understood you quite well so far.
Only one thing I didn't really understand:
What exactly do you mean by "click on the edges of the cammo in the reference to create a cage, and then drag the points so that your logo stretches and distorts to exactly match the shape"?YPCD When I say "create a cage," I'm referring to a transformation tool: warp. Here you're using a reference image, for example, a cammo texture where the logo will go. You position points along the edges or important lines of the surface. You click and drag the grid points to stretch, shrink, and distort. You do this so that the PNG fits into the original space.
-
YPCD When I say "create a cage," I'm referring to a transformation tool: warp. Here you're using a reference image, for example, a cammo texture where the logo will go. You position points along the edges or important lines of the surface. You click and drag the grid points to stretch, shrink, and distort. You do this so that the PNG fits into the original space.
DannyPennis aaah ok I understand now. That should have been obvious to me. Thanks!
-
YPCD When I say "create a cage," I'm referring to a transformation tool: warp. Here you're using a reference image, for example, a cammo texture where the logo will go. You position points along the edges or important lines of the surface. You click and drag the grid points to stretch, shrink, and distort. You do this so that the PNG fits into the original space.
DannyPennis another quick question: When you wrote "Create a new layer and paste the PNG onto it. Lower the opacity of the original texture layer to 35%" you did mean lower the opacity of the acr texture and not the opacity of the image on top right?
-
DannyPennis another quick question: When you wrote "Create a new layer and paste the PNG onto it. Lower the opacity of the original texture layer to 35%" you did mean lower the opacity of the acr texture and not the opacity of the image on top right?
-
YPCD yes, exactly.
DannyPennis I kinda figured out where to put an image to have it (somewhat) accurately appear where I want it to in-game. But I ran into another issue: Why does my gun turn out blue after having covered the entire weapon _col.png in a black color? Even after changing the _nml.iwi of the acr into a blank image with the correct resolution it still turns out blue. Even when I want the weapon to be a dark shade of green it still turns into a weird shade of blue. What is up with that?
-
DannyPennis I kinda figured out where to put an image to have it (somewhat) accurately appear where I want it to in-game. But I ran into another issue: Why does my gun turn out blue after having covered the entire weapon _col.png in a black color? Even after changing the _nml.iwi of the acr into a blank image with the correct resolution it still turns out blue. Even when I want the weapon to be a dark shade of green it still turns into a weird shade of blue. What is up with that?
YPCD The original specular glow has a bluish metallic tone. When the diffuse color becomes too dark or uniform, the game applies this specular glow on top. The game is probably still using the weapon's original _spc.iwi file. Also, the whitespace you created in the _nml file is probably wrong; the normal map cannot be black or completely empty. The correct plane/whitespace is purple, a specific RGB 128, 128, 255.
So, extract it and edit it in GIMP as well, leaving it at 0,0,0 or use the same as you used in _col, create a new png with the color 128,128,255 and convert it back to _nml.iwi. Leaving it in black or white also messes up all the colors. Sorry for not mentioning this part too. -
YPCD The original specular glow has a bluish metallic tone. When the diffuse color becomes too dark or uniform, the game applies this specular glow on top. The game is probably still using the weapon's original _spc.iwi file. Also, the whitespace you created in the _nml file is probably wrong; the normal map cannot be black or completely empty. The correct plane/whitespace is purple, a specific RGB 128, 128, 255.
So, extract it and edit it in GIMP as well, leaving it at 0,0,0 or use the same as you used in _col, create a new png with the color 128,128,255 and convert it back to _nml.iwi. Leaving it in black or white also messes up all the colors. Sorry for not mentioning this part too.DannyPennis sorry to keep bothering but you're going to have to explain it to me like I am a toddler
What I need to do is:- Convert the _nml.iwi into a png file.
- Set the rgb values of the png to 0,0,0 (or the same as the _col.iwi if it is a single color).
- Add another layer on top with the rgb values set to 128,128,255 ("purple")
This part is where I am confused. Do I have the "purple" layer on top with 100% opacity or have that layer set to 50% opacity or have both layers with a specific opacity? I tried having the _nml.iwi with 128,128,255 and the _col.iwi to just black (0,0,0) but it didn't work out.
btw don't worry about not mentioning it earlier I haven't mentioned that problem before so you couldn't really know I had that issue to begin with.
-
DannyPennis sorry to keep bothering but you're going to have to explain it to me like I am a toddler
What I need to do is:- Convert the _nml.iwi into a png file.
- Set the rgb values of the png to 0,0,0 (or the same as the _col.iwi if it is a single color).
- Add another layer on top with the rgb values set to 128,128,255 ("purple")
This part is where I am confused. Do I have the "purple" layer on top with 100% opacity or have that layer set to 50% opacity or have both layers with a specific opacity? I tried having the _nml.iwi with 128,128,255 and the _col.iwi to just black (0,0,0) but it didn't work out.
btw don't worry about not mentioning it earlier I haven't mentioned that problem before so you couldn't really know I had that issue to begin with.
YPCD You only need one thing for the _nml file. Take your original weapon_remington_acr_nml.iwi file and drag it to imgXiwi.exe , it will become a PNG. Open this PNG in GIMP. In GIMP: Click on Colors at the top and select Colorize or simply Fill with color. Enter these exact numbers: Red = 128, Green = 128, Blue = 255. This will make the entire image solid purple. That's it. No extra layers. No black underneath. No changing the opacity. All 100% purple. Save it as a new PNG of the same size as before. Drag this new purple PNG back to imgXiwi.exe, it will become weapon_remington_acr_nml.iwi. Place this new _nml.iwi file in your folder: %localappdata%\Plutonium\storage\iw4\images\
-
YPCD You only need one thing for the _nml file. Take your original weapon_remington_acr_nml.iwi file and drag it to imgXiwi.exe , it will become a PNG. Open this PNG in GIMP. In GIMP: Click on Colors at the top and select Colorize or simply Fill with color. Enter these exact numbers: Red = 128, Green = 128, Blue = 255. This will make the entire image solid purple. That's it. No extra layers. No black underneath. No changing the opacity. All 100% purple. Save it as a new PNG of the same size as before. Drag this new purple PNG back to imgXiwi.exe, it will become weapon_remington_acr_nml.iwi. Place this new _nml.iwi file in your folder: %localappdata%\Plutonium\storage\iw4\images\
DannyPennis But I don't see any iw4 folder. I see demonware (no clue what that is), iw5, t4, t5, t6. Do I just create a folder named "iw4" and inside that folder I create another one named "images"? Or place it inside iw5/images (seems to make more sense to me)?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login