[Release] Black ops II Mapvote for Zombies and Multiplayer
-
hindercanrun
yes I have no problem waiting... but please... don't answer anymore... now please ask again to "Sorex" -... please don't answer here anymore...! let's hope "Sorex " responds.. -
Black ops II Mapvote for Zombies and Multiplayer
Developed by DoktorSAS
Special thanks to @ZECxR3ap3r & @JezuzLizard for their contributions to the development. Additional thanks to @John Kramer for image editing and birchy for the LUI starting point.
Introduction
This project, initiated in March 2020, enables players to vote for the next map and/or game mode in upcoming matches. The project does not provide compiled files; if needed, compile the file using the gsc-tool.
Black Ops II: multiplayer
How to setup the mapvote step by step
-
Compile the Script:
Compile themapvote.gscfile using a GSC Compiler. This step is not required if you are working with the plutonium client. -
Place the Compiled File:
Copy the compiled file into your directory%localappdata%\Plutonium\storage\t6\scripts\mp\. -
Configure Server File:
Copy the content ofmapvote.cfginto your server configuration file (e.g.,server.cfg,dedicated_mp.cfg,dedicated.cfg, etc.) that manages the Multiplayer server. -
Edit Dvars for Aesthetic Parameters:
- Set the Dvar
mv_mapsto specify the maps shown in the mapvote. For example:set mv_maps "mp_studio mp_nuketown_2020 mp_carrier mp_drone mp_slums" - Set the Dvar
mv_enableto 1 to activate the mapvote on your Multiplayer server. - For random gametypes, set the Dvar
mv_gametypesspecifying the gametype ID (dm, war, sd, etc.) and the file to run if necessary. For example:set mv_gametypes "[email protected] [email protected]"
- Set the Dvar
-
(Plutonium ONLY) LUI UI with mod support:
- Take the content of the folder
T6Mapvoteand place it in your folder%localappdata%\Plutonium\storage\t6\mods\ - Set the dvar
fs_gamein your server configuration file (e.g.,server.cfg,dedicated_zm.cfg,dedicated.cfg, etc.) - Set the dvar
mv_luito in your server configuration file (e.g.,server.cfg,dedicated_zm.cfg,dedicated.cfg, etc.)
- Take the content of the folder
-
Run the Server:
Start the server and immerse yourself in the map voting experience. You're done!
Settings: dvars
Dvar Default Value Description mv_enable1 Enable/Disable the mapvote (1 for enable, 0 for disable). mv_maps"" List of maps that can be voted on the mapvote; leave empty for all maps. mv_time20 Time (in seconds) allotted for voting. mv_credits1 Enable/Disable credits of the mod creator. mv_socialname"SocialName" Name of the server's social platform (Discord, Twitter, Website, etc.). mv_sentence"Thanks for playing" Thankful sentence displayed. mv_votecolor"5" Color of the vote number. mv_arrowcolor"white" RGB color of the arrows. mv_selectcolor"lighgreen" RGB color when a map gets voted. mv_backgroundcolor"grey" RGB color of the map background. mv_blur"3" Blur effect power. mv_gametypes"" Dvar to have multiple gametypes with different maps. Specify gametype IDs and associated files. mv_extramaps0 Enable 6 maps mapvote when set to 1. mv_allowchangevote1 Enable/Disable the possibility to change vote while the time is still running (1 for enable, 0 for disable). mv_randomoption1 If set to 1 it will not display which map and which gametype the last option will be (Random) mv_minplayerstovote1 Set the minimum number of players required to start the mapvote mv_lui1 If set to 1 it will use the LUA/LUI ui interface (It required the mod support and the lua files) Black ops II: zombies
How to setup the mapvote step by step
-
Compile the Script:
Compile themapvote.gscfile using a GSC Compiler. This step is not required if you are working with the plutonium client. -
Place the Compiled File:
Copy the file into your directory%localappdata%\Plutonium\storage\t6\scripts\zm\. -
Configure Server File:
Copy the content ofmapvote.cfginto your server configuration file (e.g.,server.cfg,dedicated_zm.cfg,dedicated.cfg, etc.) that manages the Zombies server. -
Edit Dvars on your configuration file:
- Set the Dvar
mv_mapsto specify the maps shown in the mapvote. For example:set mv_maps "zm_tomb zm_buried zm_town zm_busdepot zm_farm zm_transit zm_prison zm_highrise zm_nuked" - Set the Dvar
mv_enableto 1 to activate the mapvote on your Zombies server.
- Set the Dvar
-
Run the Server:
Start the server and enjoy the map voting experience. You're done!
Download
It is possbile to download either the source code or the released code. The source code is not fully test and could run into issue that need to be reported while the release is tested code that could have some bug not fixed but working as intended.
I highly recommend using the unreleased version and keeping it up to date for implementing features and patching reported bugs.
The following buttons will direct you to the corresponding pages: -
-
@CamouflageLvCat
- Not a good idea to post your email on a forum
- There no extra files you need, you just need the mapvote.gsc compiled and the gamesetting folders with all gamemodes cfg that is provided by Plutonium.
-
@CamouflageLvCat
- Not a good idea to post your email on a forum
- There no extra files you need, you just need the mapvote.gsc compiled and the gamesetting folders with all gamemodes cfg that is provided by Plutonium.
-
@CamouflageLvCat I did not create any war.cfg. Follow the guide.
-
Sorex remember .. ? (image) . there appears "invalid" when configuring in tdm tdm... which didn't bother me because it was only .."war" mode on my server. now i want to add other modes and i get different errors ..besides people who want to vote "war" ..will not know that "invalid" is "war"..!
-
@CamouflageLvCat The issue is just an issue on war translation, on bo2 the g_gametype is called tdm but the gsc code have a translation error. If you download the code not from the release section the code will not have that issue.
-
@CamouflageLvCat The issue is just an issue on war translation, on bo2 the g_gametype is called tdm but the gsc code have a translation error. If you download the code not from the release section the code will not have that issue.
This post is deleted! -
@CamouflageLvCat The issue is just an issue on war translation, on bo2 the g_gametype is called tdm but the gsc code have a translation error. If you download the code not from the release section the code will not have that issue.
This post is deleted! -
@CamouflageLvCat The issue is just an issue on war translation, on bo2 the g_gametype is called tdm but the gsc code have a translation error. If you download the code not from the release section the code will not have that issue.
-
@CamouflageLvCat
-
Black ops II Mapvote for Zombies and Multiplayer
Developed by DoktorSAS
Special thanks to @ZECxR3ap3r & @JezuzLizard for their contributions to the development. Additional thanks to @John Kramer for image editing and birchy for the LUI starting point.
Introduction
This project, initiated in March 2020, enables players to vote for the next map and/or game mode in upcoming matches. The project does not provide compiled files; if needed, compile the file using the gsc-tool.
Black Ops II: multiplayer
How to setup the mapvote step by step
-
Compile the Script:
Compile themapvote.gscfile using a GSC Compiler. This step is not required if you are working with the plutonium client. -
Place the Compiled File:
Copy the compiled file into your directory%localappdata%\Plutonium\storage\t6\scripts\mp\. -
Configure Server File:
Copy the content ofmapvote.cfginto your server configuration file (e.g.,server.cfg,dedicated_mp.cfg,dedicated.cfg, etc.) that manages the Multiplayer server. -
Edit Dvars for Aesthetic Parameters:
- Set the Dvar
mv_mapsto specify the maps shown in the mapvote. For example:set mv_maps "mp_studio mp_nuketown_2020 mp_carrier mp_drone mp_slums" - Set the Dvar
mv_enableto 1 to activate the mapvote on your Multiplayer server. - For random gametypes, set the Dvar
mv_gametypesspecifying the gametype ID (dm, war, sd, etc.) and the file to run if necessary. For example:set mv_gametypes "[email protected] [email protected]"
- Set the Dvar
-
(Plutonium ONLY) LUI UI with mod support:
- Take the content of the folder
T6Mapvoteand place it in your folder%localappdata%\Plutonium\storage\t6\mods\ - Set the dvar
fs_gamein your server configuration file (e.g.,server.cfg,dedicated_zm.cfg,dedicated.cfg, etc.) - Set the dvar
mv_luito in your server configuration file (e.g.,server.cfg,dedicated_zm.cfg,dedicated.cfg, etc.)
- Take the content of the folder
-
Run the Server:
Start the server and immerse yourself in the map voting experience. You're done!
Settings: dvars
Dvar Default Value Description mv_enable1 Enable/Disable the mapvote (1 for enable, 0 for disable). mv_maps"" List of maps that can be voted on the mapvote; leave empty for all maps. mv_time20 Time (in seconds) allotted for voting. mv_credits1 Enable/Disable credits of the mod creator. mv_socialname"SocialName" Name of the server's social platform (Discord, Twitter, Website, etc.). mv_sentence"Thanks for playing" Thankful sentence displayed. mv_votecolor"5" Color of the vote number. mv_arrowcolor"white" RGB color of the arrows. mv_selectcolor"lighgreen" RGB color when a map gets voted. mv_backgroundcolor"grey" RGB color of the map background. mv_blur"3" Blur effect power. mv_gametypes"" Dvar to have multiple gametypes with different maps. Specify gametype IDs and associated files. mv_extramaps0 Enable 6 maps mapvote when set to 1. mv_allowchangevote1 Enable/Disable the possibility to change vote while the time is still running (1 for enable, 0 for disable). mv_randomoption1 If set to 1 it will not display which map and which gametype the last option will be (Random) mv_minplayerstovote1 Set the minimum number of players required to start the mapvote mv_lui1 If set to 1 it will use the LUA/LUI ui interface (It required the mod support and the lua files) Black ops II: zombies
How to setup the mapvote step by step
-
Compile the Script:
Compile themapvote.gscfile using a GSC Compiler. This step is not required if you are working with the plutonium client. -
Place the Compiled File:
Copy the file into your directory%localappdata%\Plutonium\storage\t6\scripts\zm\. -
Configure Server File:
Copy the content ofmapvote.cfginto your server configuration file (e.g.,server.cfg,dedicated_zm.cfg,dedicated.cfg, etc.) that manages the Zombies server. -
Edit Dvars on your configuration file:
- Set the Dvar
mv_mapsto specify the maps shown in the mapvote. For example:set mv_maps "zm_tomb zm_buried zm_town zm_busdepot zm_farm zm_transit zm_prison zm_highrise zm_nuked" - Set the Dvar
mv_enableto 1 to activate the mapvote on your Zombies server.
- Set the Dvar
-
Run the Server:
Start the server and enjoy the map voting experience. You're done!
Download
It is possbile to download either the source code or the released code. The source code is not fully test and could run into issue that need to be reported while the release is tested code that could have some bug not fixed but working as intended.
I highly recommend using the unreleased version and keeping it up to date for implementing features and patching reported bugs.
The following buttons will direct you to the corresponding pages:Sorex
any idea why this happens?
-
-
Sorex Hey man, after the setting up, the server won't load past: "Loading fastfile seasonpass_load_mp", and if I try to connect it says: "Lost connection to host".
-
Matheus14Silva
This issue seems unrelated to the mapvote. Could be related to others mods/script are you loading or it could e caused by a wrong full setup of any of this mods/script and server configuration.If you can prove that its caused by the mapvote i will look into it.
-
hey ! I was a little confused about the mod. Specifically, I mean im confused about how to add multiple game types. When I try to run the server it works normally for the first game. But upon the map voting section all 3 maps are in FFA, and when going into the game the scoreboard does not work.
TL;DR,
I just want to add FFA, Domination, TDM, and CTF to the gametype rotation pool but im unsure how to do so.(I think its just me specifying the gametypes wrong in the CFG, probably malformatted.
-
hey ! I was a little confused about the mod. Specifically, I mean im confused about how to add multiple game types. When I try to run the server it works normally for the first game. But upon the map voting section all 3 maps are in FFA, and when going into the game the scoreboard does not work.
TL;DR,
I just want to add FFA, Domination, TDM, and CTF to the gametype rotation pool but im unsure how to do so.(I think its just me specifying the gametypes wrong in the CFG, probably malformatted.
Sosuu
If you look at the guide is writtend how to do that there.To add support for multiple gametypes you need to edit the dvar like that :
set mv_gametypes "dm;freeforall.cfg war;mycustomtdm.cfg"dm is the g_gametype and freeforall.cfg is the custom file to execute if you want set specific setting for that gamemode.
-
Sosuu
If you look at the guide is writtend how to do that there.To add support for multiple gametypes you need to edit the dvar like that :
set mv_gametypes "dm;freeforall.cfg war;mycustomtdm.cfg"dm is the g_gametype and freeforall.cfg is the custom file to execute if you want set specific setting for that gamemode.
Sorex said in [Release] Black ops II Mapvote for Zombies and Multiplayer:
dm;freeforall.cfg war;mycustomtdm.cfg
this seemed to fix the "free for all" issue, but now it is only playing the first specified gamemode on the line
-
Sorex said in [Release] Black ops II Mapvote for Zombies and Multiplayer:
dm;freeforall.cfg war;mycustomtdm.cfg
this seemed to fix the "free for all" issue, but now it is only playing the first specified gamemode on the line
Sosuu This is the same issue I'm having currently.
-
Sosuu This is the same issue I'm having currently.
CopgunPlays same issue here. Managed to work around it by only giving the gamemodes („dm tdm gun“) but that fucks with some modes (like kill confirmed having 9999 points for each team and not being able to view the scoreboard)
-
I'm unable to compile it using GSC Tool.
[ERROR]:compiler:mapvote.gsc:177:39: local variable 'g1' not found at mapvote.gscAnd before this I had another issue with encoding, but I figured it out, basically the file is UTF8 with BOM, I converted it to standard UTF8 and it is now able to at least parse it, however I have the above issue.
The error above may be caused by the original scripters using a different compiler, if so, why doesn't the readme/description specify which compiler instead of just saying "use a gsc compiler"? However, I'd prefer to just fix these compile errors using the GSC Tool, because it seems it's the most supported one now; I have no GSC experience at all, but I have a C, Java and C# background.
Any help is appreciated
